BuildArt (International) Co., Ltd.
A Subsidiary Company of Pantech Holdings LTD.
EXCEL
DESCRIPTION

Excel Waterproofing Sealer is an environmentally safe, water based, breathable, high binding, clear acrylic, penetrating sealer/primer. It seals, waterproofs, primes, protects and highlights the natural beauty in the colours of the materials on which it is used. It goes on milky white but dries clear to waterproof, seal and bond.

FOR USE ON
Concrete Stucco Stone Masonry
Brick Wood Siding Wood Decks Plaster
Drywall Metal Chalky Surfaces

ADVANTAGES

*Low V.O.C'S - Environmentally safe

* Waterproofs - Lasts up to 5 years.

*Masonry conditioner - Recoat with paint within 2 hours depending on temperature & humidity.

*Rejuvenates old brick and old plaster - Increase bonding strength.

*Binder/Clear primer over vinyl siding - To improve paint adhesion.

*Will bring down the pH factor in hot cement, stucco and plaster paint over in less than 7 days.

*Will bind up chalky surfaces - Recoat with either latex or alkyd paints, within 2-4 hours, depending on the temperature and humidity.


*Add to block filler to give better protection, adhesion & coverage to the top coat.


*Add excel to latex paint. Improve spread and adhesion.


*Add excel to all latex sealers and primers. Improves adhesion and reduces risk of top coat failure.


*Mixed 1/1 with latex paint, it will kill water stain bleed throuch.

p3c_a.gif (27465 bytes)       p3c_b.gif (30437 bytes)       p3c_c.gif (29408 bytes)


TECHNICAL SPECIFICATIONS
Generic Type
Colour

Percent Solids by Weight
Percent Solids by Volume
Viscosity
PH
Specific Gravity
Flash-Point (Closed Cup)
VOC

Drying Time (Normal 77F, 50% R.H.)

Reduction Solvent
Clean up Solvent
Type of Cure
Recommended Coverages (theoretical)
Freeze Thaw Stability - 10 cycles
Particale Sixe
Acid No
Water Permeability - meets U.S. Federal Spec
Water Permeance of Masonry - Meets
Moisture Vapour Transmission - Meets
acrylic emulsion
white, dries clear
10% +/- 1%
9.5% +/- 1%
7.5 cps
7.5 - 8.0
1.02
none
none
Touch 1-3 hours
Recoat 1 hour after first coat is dry
water
water
coalescence
5 mils dry (5 mils wet)
ASTM-D1173-70
<0.15 micron
<25
T-P-00035
ASTM E-514-74
ASTM D-1653

[ EVERBOND | WALL-FLEX | EXCEL | EVER EP110/EP120 | MENDEX ]
[ Job Reference | Enquiry | Contact Us! ]